Community > Forum > Official Armadillo Aerospace Forum > Bearing inner circle grinding head loading method

Bearing inner circle grinding head loading method

Posted by: Koprew - Fri Sep 19, 2014 8:06 am
Post new topic Reply to topic
 [ 1 post ] 
Bearing inner circle grinding head loading method 
Author Message
Spaceflight Enthusiast
Spaceflight Enthusiast
Joined: Fri Aug 15, 2014 5:42 am
Posts: 1
Post Bearing inner circle grinding head loading method   Posted on: Fri Sep 19, 2014 8:06 am
Main processing measurement is commonly used in grinding and honing processing, main axis definition, define and grinding hole main dimensions.
1) axis definition has three main variables measuring two main shaft measuring instrument, often used for simple cylindrical. Cover when measuring outdoor hanging hand on the circumference of a circle three point active instrument measuring the workpiece, workpiece clamping trapped in the grinding process by changing the length size is converted to electrical signals of sensors, six
(2) to determine the hole has two main dimensions and two. Two point measurement is usually used to define and process is the same as the inner shaft. A hole and honing grinding to normal traffic. This process is mainly by measuring (see traffic rules), pneumatic plug (see gas measurement instruments) process definition, but the hole will have a certain size and display output signal automatic function.The type of one-way bearing ring under load
= - grinding active measurement control fins mating with clearance of workpiece, such as diesel engine of diesel injector nozzle is pump.
Positive after processing is mainly used for the determination of mineral machine, drilling machine, precision machine tools and processing equipment. After the completion of the workpiece processing automatic measurement. When the size change, knives, knife in the cutting tool or for other reasons (see warnings), to the tolerance zone of tolerance design boundary control, automatic signal compensation deviation compensation mechanism and compensation of workpiece, supply will not exceed the limits of tolerance. 1970 s automatic analyzer, combined with statistical length sensor processing after the activity. It has quickly remove bulky error is calculated, such as all kinds of function analysis, calculate the standard deviation and error, so this kind of limit control signal can timely send the relevant statistical law

Back to top
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

Who is online 

Users browsing this forum: No registered users and 16 guests

© 2019 The International Space Fellowship, developed by Gabitasoft Interactive. All Rights Reserved.  Privacy Policy | Terms of Use